當前位置: 選型首頁 >  HURST >  電機 >系列介紹

HURST  SLS/SBLS   電機

收錄型號： 0條（帶參數(shù)型號： 0 條）

選型指南： 0 條 應用案例： 0 條

安裝調(diào)試： 0 條 安裝調(diào)試： 0 條

維護維修： 0 條 升級改造： 0 條

收藏

詳細介紹

 SLS, SBLS Variable Speed Linear Actuator Specifications:

Maximum Load:SLS 15 lbs., SBLS 10 lbs.
Rotor  Assembly:Threaded to accept a std. 1/4"-20 5/6 ACME 2G right-hand screw (Class 2G RH)
Insulation Class: Class A (105?C)
Lead Wire:4 leads 24 AWG (approx. 9 inches [228.6 mm])
Operation Ambient Temp:-10?C to +40?C (approx.)
Temperature Rise:70?C max
Rotor Bearings:Ball Bearings Standard
Shaft Length:8 inches [203.2 mm] max with travel 6.75 inches [171.45 mm]
Note:  Typical data subject to change without notification

Additional Information:

SLS and SBLS stepping linear actuators are reversible, permanent magnet types. The nut accepts a 1/4 in. diameter, 0.048 pitch Acme screw that provides linear motion for pushing, pulling, lifting, and positioning applications.

Standard 8 in. [203.2 mm] lead screws have maximum travel of 6.75 in. [171.45 mm] and a maximum thrust of 15 pounds. Ball bearings are standard. The motors have a resolution of 0.001or 0.002 inch per step (1000 or 500 steps per inch). They may be driven with Hurst stepping motor controllers.

Notes:

  • Standard SLS and SBLS motors have 4-phase, unipolar windings for 6,12, or 24 VDC.

  • Bi-polar windings may be specified.

SLS, SBLS Variable Speed Linear Actuator Drawings:

SLS, SBLS Variable Speed Linear Actuator Diagrams: